It is important to choose the right size water softener that will fit the needs of your household.

A water softener should be measured based on the property’s size and maximum number of potential occupants. This will ensure that soft water will always be available and that regeneration will not be interrupted – click here.

The softener can also be sold as an asset if you are moving out and decide to leave it in place. People are so used and comfortable with soft water, that they will install the one they have in their new house if the current one is not available. There is no problem if the capacity of your softener exceeds your circumstances. You can adjust it to meet your requirements.

The average person will consume 160 litres of water each day. It is therefore possible to calculate the softener’s capacity and determine if it will be sufficient for your household. The average minimum time between regenerations is 2 days. A UK water hardness average is 20 degrees Clarke. Based on this, a 10 litre softener would hold approximately 1500 litres of water and be suitable for a household of 4.

An 18-litre softener of approximately 2900 litres capacity would suit up to 8 people and a 4-bedroom house.

Regeneration is required when a domestic water softener has reached its maximum capacity. In simple words, it is where the resin gets flushed with salt water. Hardness minerals such as magnesium, calcium, and magnesium are then removed from the water supply by the sodium. You should also consider the time between each softener regeneration.

A timer-controlled valve is the cheapest option. The user can program the softener so that it goes through a certain amount of regeneration, such as. It will regenerate on the second or third day depending on how much water is used. The best timer control method is when water usage and residents are relatively constant. It can also be calculated accurately the time between regenerations.

This is the downside. If the water usage is increased rapidly, the resin could become exhausted. The water may also become hard. It will cause salt overuse, which will have no adverse effects on the softener.

A meter controlled valve is the second option, and it is most often preferred on the domestic market. This type has a preset reserve and capacity that will activate a regenerative valve when it reaches the set point. These units are most useful when water usage fluctuates or there is prolonged periods without any use. A holiday home. A meter controlled salt softener gives you more flexibility and is the most economical way to use salt.

Leave a Reply

Your email address will not be published. Required fields are marked *